Races of War




Home


Create a Game Board & Pieces From a Template


Game Rules


Order Information


Game Strategy


More Free Resources


Contact TBC Productions

2-Player Game Board
 
Instructions:  Right-click on the image below and select “Save Picture As” to save the picture to your computer.
After downloading the image, open it using paint, and select the menu “Image”“Stretch/Skew”.
Then do a horizontal and vertical stretch of 350% of original.  Then print the image (it should fit almost perfectly on 4 pages).
After printing the pages, either laminate it, or tape it onto a piece of cardboard.

.

Game Pieces
 
Instructions:  There are a couple of different options.  The important thing is that the pieces be identifiable
from one side, but you should not be able to tell the pieces apart from the other side.  Also, you’ll want to make
sure they fit in the hexagons of your board, and will stay standing.
 
I.)  If you have an old game of Stratego or Ultimate Stratego you can use the game pieces that came with it.
You may want to put stickers over the pictures and renumber the pieces as follows.
 
You will need the following 20 pieces for each player:

Labels to use for pieces (rank) Quantity needed of each piece
0 1
1 1
2 4
3 2
4 2
5 2
6 2
7 1
8 1
9 1
10 1
X 2

In addition to the listed 20 pieces per player, you will also need an additional four pieces per player.
These pieces may be normal pawns taken from a Chess game.  You will need two white pawns, and two black pawns per player.

II.)  If you don’t have an old game of Stratego or Ultimate Stratego you can glue two dominoes together for each piece.
The dominoes should be glued together so that the blank sides are towards the outside.
You may then label one side of the pieces according to the chart given above.
You will also need a few game pawns as described above.

dominoes